NandX Standalone Kit (reads/writes 16mb nands, programs the X360Ace v3)
NandX -> Coolrunner cable (connects the NandX to the X360Ace v3)
X360Ace v3 Glitch Chip (coolruner)
Coolrunner Pin Header (makes connecting the NandX easier)
4gb R/W Kit* (read/writes 4gb nands)
This Kit includes all** the hardware required to Reset Glitch Hack 1x Slim console (excluding winchester motherboards). You will require a soldering iron and good quality solder.
**corona v3/4/5/6 will require a postfix adapter
The Reset Glitch Hack install is not plug in and play. The install requires soldering and the X360Ace v3 will require tuning with the various timing files available on the internet to get your console to boot correctly (no files or instructions are included with this kit) No software is included with this kit for use after your console is Reset Glitch Hacked.
PLEASE NOTE: We do not recommend this for anyone without soldering experience. Incorrect installation can permanently damage your Xbox 360 beyond repair. No support is provided with these kits for the installation. These kits are sold on the basis that you have done your own research and know how to install a Reset Glitch Hack.
*4gb R/W Kit only required if you have a corona with a 4gb nand.
If you are uncomfortable performing the install yourself we offer the install as a service. Which includes installation of the glitch chip, tuning and installation of software on your console after it is Reset Glitch Hacked. See here for more information
To identify what motherboard you have see the below picture.
If you have a corona motherboard check in your storage settings to see if it has a 4gb storage device listed. If it does you have a 4gb corona.